How do you test the Range and Linearity of your analytical method? Lets summarize it in brief:
Range
The range of the method is the interval between upper level and lower level of analyte that have been determined with acceptable accuracy, precision and linearity.
Dissolution:
- Should be performed from 10% to 150% of the working concentration.
- For multiple strengths 10% of the lower concentration and 150% of the higher strength concentration including the working range.
- For controlled release formulation, ±20% over the specified limit.
Acceptable Criteria:
- Response should be linear and correlation coefficient should be NLT 0.995
Related Substances and Residual solvents:
- API: LOQ to 150% of the limit concentration of Known and unknown impurities.
- Formulations: LOQ to 200% of the limit concentration of Known and unknown impurities.
Acceptable Criteria:
- Response should be linear and correlation coefficient should be NLT 0.99
Assay and Content uniformity:
- For Assay: 80% to 120% of the working concentration
- For content uniformity: 70% to 130% of the working concentration.
Acceptable Criteria:
- Response should be linear and correlation coefficient should be NLT 0.995
Linearity
Linearity is the ability of analytical procedure to obtain a response that is directly proportional to concentration (amount) of analyte in the sample within a given range.
- ICH guidelines recommend evaluating a minimum of five concentrations to assess linearity.
- The linearity solutions are prepared by performing serial dilutions of a stock solution. The response of the interested peak is plotted against the, corresponding actual concentration (use potency/purity).
- Each linearity solution prepared should be injected either in duplicate or triplicate.
- Brazil regulation requires linearity to be performed by preparing three individual stock solutions (triplicate stock) and serial dilution thereof at 5 different levels.
Read also:
Resource Person: Jairus Fernandes
إرسال تعليق